3D NANO HEATER

Heating faster,
with less power.

Reducing power
consumption up to
90%

3D Nano Heater, which reduces power consumption by up to 90% and shows superior heating performance, can be used in various places at a reasonable price.

3D NANO HEATER

Heating faster,
with less power.

Reducing power consumption up to 90%

3D Nano Heater, which reduces power consumption by up to 90% and shows superior heating performance, can be used in various places at a reasonable price.

CES 2024 INNOVATION AWARD PRODUCT

3D Nano Heater utilizing
high-conductivity nanowires

Our 3D Nano Heater won the CES 2024 Innovation Award in San Francisco. We are committed to using this opportunity to showcase our products to the world and become a company that contributes to ESG management.

MASS PRODUCTION SUCCESS

You've Never Ever Seen this Before.

We have successfully mass-produced 3D nano heaters, made with copper nanowires. Our innovative process is low-cost and environmentally friendly, and it can be done without vacuum equipment. This means that our heaters can be mass-produced at room temperature, making them more accessible and affordable. The heaters are highly efficient, with energy savings of up to 90%. Commercial production is planned for early 2024.

Performance
comparision

Heating Cable
3D Nano Heater

9 Min.

Time to reach 122℉

1 Min.


30W

Power Consumption

3.3W

Heats up evenly.

It is important and difficult to spin the nanofibers evenly. When the nanofibers are spun evenly, 3D Nano Heater heats up evenly. After years of development we were able to create a 3D Nano Heater that met our needs.

Withstanding 9t
of pressure.

Heating cables cannot withstand the pressure of 9t but our nano heating film works well even with the pressure of 9t.  In the case of a heating cable, pressure is intensively applied to the cable and the shape is damaged. In the case of nano heating film, however, the flat surface of it distributes the pressure so that the shape is maintained.

Withstands 

9t of pressure.

Heating cables cannot withstand the pressure of 9t, but our nano heating film works well even under the pressure of 9t.  In the case of a heating cable, the pressure is  applied to the cable intensively, and the shape is damaged. However, in the case of 3D Nano heater, the flat surface of the film distributes the pressure so that the shape is maintained.

No problem in
extreme environment.

25℃(77℉, humidity 95%) → -40℃(-40℉), with an impact of 2.5J(7 times)

Built to operate in roads of chilly mountaintops.

| -40℃(-40℉) Impact Test Report

No problem with
extreme environment.

25℃(humidity 95%) → -40℃,
with an impact of 2.5J(7 times)

Built to operate in roads of chilly mountaintops.

| -40℃ Impact Test Report

It heats up,
even if it is damaged.

If the cable is damaged, the entire cable stops working.
However, the 3D Nano Heater will continues to heat even if it is damaged.

After folding,
it keeps heating.

Even when the nano heating film was folded more than 1,000 times, it generated heat without any problems. Compared to ITO film, it showed excellent flexibility. We proved that it can be bent to fit any curved surface.


After folding,
it keeps heating.

Even when the nano heating film(3D Nano Heater) was folded more than 1,000 times, it generated heat without any problems. Compared with ITO film,
it showed excellent flexibility. We proved that it can be bent to fit any curved surface.

More advantages
not telling yet.


Low-power consumption
but high-efficiency.

Our product has an electrical resistance of 1Ω, which is significantly lower than that of competing products such as graphene, CNT, and silver nanowires. This reduces power loss caused by resistance, making it possible to apply the film to portable products.

Customizing the shape
you want.

Our product keeps operating even if it was punched by machine. Besides we succeed in making our film transparent(90%). With these features, we can customize the shape you want.

Maintaining a stable
temperature.

Our product endures external pressures and temperature changes. So even in the harsh winter of the cold mountaintop, our products continue to heat up.

Using with
portable battery.

Although our products have superior heating performance, power consumption is less than heating cables up to 90%, enabling long-term heating even with portable batteries. This made it possible to develop portable heating products that were previously impossible or difficult to commercialize.  

Safer than
heating cable.

Our products generate heat with low power, so there is less risk of fire compared to heating cables. In addition, even if the film is damaged, electricity can flow safely, reducing the risk of fire due to short circuit or overload.

Fast heating
with low power.

In the case of a heating cable, the heating area is limited due to the shape of the cable, and heat loss inevitably occurs because heat energy is emitted in all directions. The nano-heating film, on the other hand, can heats up rapidly because it generates heat in a bottom-up manner over a large film area.

Zero harmful
electromagnetic waves.

In the heating cable, alternating current flows and electromagnetic waves are generated. Our nano heating film, however, is made of ultra-fine copper nanofibers and does not generate harmful electromagnetic waves by using a DC current method.

Price
competitiveness.

Existing nanofibers like graphene, carbon nanotubes, and silver nanowires are produced through very expensive materials and processes. However, our nano heating film uses copper in nano units which price is cheaper than those. So our product can be sold at reasonable prices.

More advantages not yet told.


Low-power consumption
but high-efficiency.

Our product has an electrical resistance of 1Ω, which is significantly lower than that of competing products such as graphene, CNT, and silver nanowires. This reduces power loss due to resistance, making it possible to apply the film to portable products.

Customize the shape
you want.

Our product works well even if it was punched by machine. 

In addition, we are succeed in making our film transparent(90%). With these features, we can customize the shape you want.

Maintaining a stable
temperature.

Our product can withstand external pressures and temperature changes. So even in the harsh winter of the cold mountain peaks, our products continue to heat up.

Used in
portable battery.

Although our products have superior heating performance, their power consumption is up to 90% lower than that of hating cables, enabling long-term heating even with portable batteries. This has made it possible to develop portable heating products that were previously impossible or difficult to commercialize.

Safer than
heating cable.

Our products generate heat with low power, so there is less risk of fire compared to heating cables. In addition, even if the film is damaged, electricity can flow safely, reducing the risk of fire due to short circuit or overload.

Heat fast
with lower power.

In the case of a heating cable, the heating area is limited due to the shape of the cable, and heat loss is inevitable because heat energy is emitted in all directions. The nano-heating film, on the other hand, can heat up rapidly because it generates heat from the bottom up manner over a large film area.

Zero harm
electromagnetic waves.

In the heating cable, alternating current flows and electromagnetic waves are generated. However, our nano heating film is made of ultra-fine copper nanofibers and does not generate harmful electromagnetic waves by using a DC current method.

Price
competitiveness.

Existing nanofibers such as graphene, carbon nanotubes, and silver nanowires are produced through very expensive materials and processes. However, our nano heating film uses copper in nano units, the price of which is cheaper than those. Therefore, our product can be sold at reasonable prices.

Customize the shape
you want.

3D Nano Heater
(Nano heating film)

∙Customizable
∙Maximum temperature 00℃
∙Rapid respond
∙Bendable

Transparent 3D Nano Heater

∙Transparent up to 90%
∙Maximum temperature 00℃
∙Rapid respond
∙Bendable

Customizing the shape
you want.

3D Nano Heater

∙Customizable
∙Max temperature 00℃
∙Rapid respond
∙Bendable

Transparent 3D Nano Heater

∙Transparent up to 90%
∙Max temperature 00℃
∙Rapid respond
∙Bendable

Nano Electronics Inc. | CEO Young-Tae Kim
Business Registration Number 449-87-01578
E-MAIL office@nanocorp.co.kr

TEL (82) 042-341-1203

H.Q -  (34366) 607ho, 120, Daehwa-ro, Daedeok-gu, Daejeon, Republic of Korea   

Lab. - (34366) 606ho, 120, Daehwa-ro, Daedeok-gu, Daejeon, Republic of Korea
Factory 1 - (34202) 725ho, 43, Bogyongdong-ro, Yuseong-gu, Daejeon, Republic of Korea

Factory 2 - (15104) Siheung-si, Gyeonggi-do, Republic of Korea 

Factory 3 - (17118)  Yongin-si, Gyeonggi-do, Republic of Korea 

Copyright © 2023 Nano Electronics Inc. All rights reserved.